New Gun Barrel Reaming Machine Designed for Low-Volume Manufacturers

The Eldorado M75-48-R1 is a single-spindle reaming machine designed for lower-volume gun barrel manufacturers.

The standard DeHoff reaming machine has two spindles, automated barrel loading, and automated tool handling.

The new Eldorado reaming machine has only a single spindle and requires manual loading of the barrels and reamer tooling. This makes the Eldorado machine smaller and less expensive, which makes it perfect for low-volume barrel manufacturers.

The Eldorado M75-48-R1 has a maximum reaming diameter of 0.75 inches (19 mm) and a maximum barrel length of 36 inches (914 mm).

The machine features hardened steel box ways and hand-scraped spindle housings (versus linear guide ways and milled surfaces). This results in superior vibration damping, extended tool life, and improved surface finish.

Eldorado machines are designed and manufactured by Kays Engineering in their Marshall, Missouri, USA facility.

Want more information? Click below.

Kays-DeHoff

Rate this article

[New Gun Barrel Reaming Machine Designed for Low-Volume Manufacturers]

Very interesting, with information I can use
Interesting, with information I may use
Interesting, but not applicable to my operation
Not interesting or inaccurate

E-mail Address (required):

Comments:

Type the number:

Copyright © 2024 by Nelson Publishing, Inc. All rights reserved. Reproduction Prohibited.
View our terms of use and privacy policy